 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STS2DNFS30L N-CHANNEL 30V - 0.09 - 3A SO-8 STripFETTM II MOSFET PLUS SCHOTTKY RECTIFIER PRELIMINARY DATA MAIN PRODUCT CHARACTERISTICS MOSFET VDSS 30 V SCHOTTKY IF(AV) 1A RDS(on) < 0.11 VRRM 30 V ID 3A VF(MAX) 0.46 V SO-8 DESCRIPTION This product associates the latest low voltage STripFETTM in n-channel version to a low drop Schottky diode. Such configuration is extremely versatile in implementing, a large variety of DC-DC converters for printers, portable equipment, and cellular phones. INTERNAL SCHEMATIC DIAGRAM MOSFET ABSOLUTE MAXIMUM RATINGS Symbol VDS VDGR VGS ID ID IDM (q) PTOT Parameter Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuos) at TC = 25C Drain Current (continuos) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Value 30 30 15 3 1.9 12 2 Unit V V V A A A W SCHOTTKY ABSOLUTE MAXIMUM RATINGS Symbol VRRM IF(RMS) IF(AV) IFSM IRSM dv/dt Parameter Repetitive Peak Reverse Voltage RMS Forward Current Average Forward Current Surge Non Repetitive Forward Current Non Repetitive Peak Reverse Current Critical Rate Of Rise Of Reverse Voltage TL = 135C = 0.5 tp = 10 ms Sinusoidal tp = 100 s Value 30 7 1 45 1 10000 Unit V A A A A V/s (*)Pulse width limited by safe operating area August 2001 1/6 STS2DNFS30L THERMAL DATA Rthj-amb Rthj-amb Tstg Tl (*)Thermal Resistance Junction-ambient MOSFET (*)Thermal Resistance Junction-ambient SCHOTTKY Maximum Storage Temperature Range Junction Temperature (*) Mounted on FR-4 board (Steady State) 62.5 100 -55 to 150 150 C/W C/W C C MOSFET ELECTRICAL CHARACTERISTICS (TCASE = 25 C UNLESS OTHERWISE SPECIFIED) OFF Symbol V(BR)DSS IDSS IGSS Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Test Conditions ID = 250 A, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 C VGS = 15 V Min. 30 1 10 100 Typ. Max. Unit V A A nA ON (1) Symbol VGS(th) RDS(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance Test Conditions VDS = VGS, ID = 250A VGS = 10V, ID = 1.5 A VGS = 4.5V, ID = 1.5 A Min. 1 0.09 0.13 0.11 0.15 Typ. Max. Unit V DYNAMIC Symbol gfs (1) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VDS = 15 V , ID = 1.5 A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 2.5 121 45 11 Max. Unit S pF pF pF 2/6 STS2DNFS30L 1. ELECTRICAL CHARACTERISTICS (CONTINUED) SWITCHING ON Symbol td(on) tr Qg Qgs Qgd Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDD = 15 V, ID = 1.5 A RG = 4.7 VGS = 4.5 V (see test circuit, Figure 3) VDD = 24 V, ID = 3 A, VGS = 4.5 V Min. Typ. 19 20 4.5 1.7 0.9 6 Max. Unit ns ns nC nC nC SWITCHING OFF Symbol td(off) tf Parameter Turn-off Delay Time Fall Time Test Conditions VDD = 15 V, ID = 1.5 A, RG = 4.7, VGS = 4.5 V (see test circuit, Figure 3) Min. Typ. 12 8 Max. Unit ns ns SOURCE DRAIN DIODE Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 3 A, VGS = 0 ISD = 3 A, di/dt = 100A/s, VDD = 30 V, Tj = 150C (see test circuit, Figure 5) 19 8.1 0.85 Test Conditions Min. Typ. Max. 3 12 1.2 Unit A A V ns nC A Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. SCHOTTCKY STATIC ELETTRICAL CHARACTERISTICS Symbol IR(*) VF(*) Parameter Reversed Leakage Current Forward Voltage Drop Test Conditions TJ = 25 C , VR = 30 V TJ = 125 C , VR = 30 V TJ = 25 C , IF = 1 A TJ = 125 C , IF = 1 A Min. Typ. 1.5 0.37 Max. 10 10 0.55 0.46 Unit A mA V V 3/6 STS2DNFS30L Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 4/6 STS2DNFS30L SO-8 MECHANICAL DATA DIM. MIN. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 3.8 0.4 4.8 5.8 1.27 3.81 4.0 1.27 0.6 8 (max.) 0.14 0.015 5.0 6.2 0.65 0.35 0.19 0.25 0.1 mm TYP. MAX. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45 (typ.) 0.188 0.228 0.050 0.150 0.157 0.050 0.023 0.196 0.244 0.025 0.013 0.007 0.010 0.003 MIN. inch TYP. MAX. 0.068 0.009 0.064 0.033 0.018 0.010 0.019 0016023 5/6 STS2DNFS30L Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 6/6 |
Price & Availability of STS2DNFS30L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |